TECHTONGDA Pipe Cleaner Boiler Tube Cleaning Machine with Alloy Steel Drill Bit, 110V/220V Heat Exchanger Evaporator Tube Cleaning Machine, 26.3ft Flexible Shaft, Applicable Pipe Diameter 0.47-1.42in

Product ParametersTotal Power: 1500WPower Voltage: 220V/50HZ Single-phase electricity(Incleded a 110V transformer. If your power supply is 110V, you can connect the machine to the transformer and then connect the transformer to your 110V power supply.)Rotating Speed: 0-1400r/minSize of Main Unit: 67x23x29cm (26.4x9.1x11.4 inches)Size of Control Cabinet: 38x19.5x23.5cm (15x7.7x9.3 inches)Flexible Shaft: 8M (26.3ft)Applicable Pipe Diameter: 0.47-1.42inch(12-36mm)Cleaning Tools:Nylon brush: 0.69in/17.5mmx6 pcsNylon brush: 1.34in/34mmx4 pcsAlloy drill bit: 0.47in/12mmx1 pieceAfter receiving the product, the operator can assemble the main unit and accessories according to the following steps.Step1, connect the control cabinet and main unit through the data cable.Step 2, connect the foot switch to the pneumatic connector of the main unit.Step 3, install the coupling.Step 4, connect one end of the flexible shaft to the main unit.Step 5, connect one end of the water pipe to the flexible shaft, and connect the other end of the water pipe to the water source.Step 6, connect the tool bit or brush head to the other end of the flexible shaft.After assembling the product correctly, the operator can use the machine according to the following steps.Step 1, connect the three live wires and one ground wire to the electric box.Step 2, turn on the main switch of the machine.Step 3, adjusting the rotating speed according to the working condition.Step 4, adjust the torque according to the working condition.Item Number (022837): 1 x Industrial Boiler Pipeline Cleaning Machine

• Versatile & Powerful Cleaning: Efficiently removes silt, scale, and rust from 0.47-1.42in pipes in oil, gas, and coal-fired boilers. Cleans straight, U-shaped, and S-shaped pipes with ease, ensuring optimal heat exchange efficiency and prevent system pressure rise.
• User-Friendly Design: Features a split-type design for cleaning machine can enter manholes to conduct cleaning operation. The flexible 8m/26.3ft shaft navigates elbows smoothly. The wet/dry separation design prevents water from entering the main unit.
• Physical Descaling: The motor drives the flexible shaft and brushes/alloy drill bits at high speed (0-1400 RPM), and the water flows through the nylon pipe sleeve and flows out of the tail end of the flexible shaft to carry the dirt away. This physical method ensures high cleaning capacity.
• Included Transformer: Enjoy stepless variable-frequency speed control and adjustable torque for different tasks. A 110V transformer is included, making it ready for both 220V and 110V power supplies.
• Complete Professional Kit: Comes with essential tools: 6x 0.69in Nylon Brushes, 4x 1.34in Nylon Brushes, and 1x 0.47in Alloy Drill Bit. A professional solution for industrial pipeline maintenance.